Ignite LED Black Headlamp Insert
$275.00
Replaces the PAR56 H4 and conventional sealed beams, these headlights have incredible output and a low current draw. Low beam is emitted from the single Philips LED in the centre with Ignite patented TIR Lens technology providing the High beam and park lamp functions via the 6 Cree LED’s around the outside. H4 and H13 Globe holder connector leads are supplied with each light. IP68 rated. Pricing is for a single headlamp so you need to order 2 as a pair.
In stock (can be backordered)
Ignite LED Black Headlamp Insert
The stock headlights in a 40 series were always a poor second to a glow worm, and over the years i have tried my fair share of aftermarket inserts to fix the problem, but they either broke or never really lived up to expectations.
Then Ben from Ignite came to see me at the Melbourne 4WD show and said he had a product for me to test that he reckoned was unbreakable and unbeatable when it came to replacement inserts.
I have been running these inserts in Milo for quite a while now and I have to say he was right, they are awesome! You can get them in bling chrome or stealth black.
Technical Specification
Low beam is emitted from the single Philips LED in the centre with Ignite patented TIR Lens technology providing the High beam and park lamp functions via the 6 Cree LED’s around the outside. H4 and H13 Globe holder connector leads are supplied with each light. IP68 rated.
- Beam Angle: LOW/HIGH Beam/front position light
- Voltage: 9-36V DC
- Current Draw :LB 1.7 A/0.8A @ 12/24 Volt, HB 4.1A/1.8A @ 12V/24 Volt
- Phillips LED Low Beam / CREE Led’s High Beam
- Effective Lumens: LB 1450LM, HB 3100LM
- Raw Lumens: LB 1800LM, HB 3900LM
- Projection optical structure and TIR optical lens
- Integrated Electronic Thermal Management (ETM)
- Kelvin: 6,500 K
- Lens Material Poly-Carbonate Lens Cover / Glass Inner Lens
- Mounting: Replaces PAR56 headlights
- Housing: Black powder coated die cast aluminium
- Chrome Fascia
- ECER112/R7, DOT, IP68, CE
- Connector: H4/H13
- Weight: 1.4kg
- Size: 177mm x 119mm
- Life Span: 50,000 hours
Beam Patterns
Ignite LED Black Headlamp Insert
The stock headlights in a 40 series were always a poor second to a glow worm, and over the years i have tried my fair share of aftermarket inserts to fix the problem, but they either broke or never really lived up to expectations.
Then Ben from Ignite came to see me at the Melbourne 4WD show and said he had a product for me to test that he reckoned was unbreakable and unbeatable when it came to replacement inserts.
I have been running these inserts in Milo for quite a while now and I have to say he was right, they are awesome! You can get them in bling chrome or stealth black.
Technical Specification
Low beam is emitted from the single Philips LED in the centre with Ignite patented TIR Lens technology providing the High beam and park lamp functions via the 6 Cree LED's around the outside. H4 and H13 Globe holder connector leads are supplied with each light. IP68 rated.
- Beam Angle: LOW/HIGH Beam/front position light
- Voltage: 9-36V DC
- Current Draw :LB 1.7 A/0.8A @ 12/24 Volt, HB 4.1A/1.8A @ 12V/24 Volt
- Phillips LED Low Beam / CREE Led's High Beam
- Effective Lumens: LB 1450LM, HB 3100LM
- Raw Lumens: LB 1800LM, HB 3900LM
- Projection optical structure and TIR optical lens
- Integrated Electronic Thermal Management (ETM)
- Kelvin: 6,500 K
- Lens Material Poly-Carbonate Lens Cover / Glass Inner Lens
- Mounting: Replaces PAR56 headlights
- Housing: Black powder coated die cast aluminium
- Chrome Fascia
- ECER112/R7, DOT, IP68, CE
- Connector: H4/H13
- Weight: 1.4kg
- Size: 177mm x 119mm
- Life Span: 50,000 hours
Beam Patterns
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.